Table of Contents
Advertisement
•
Make sure that there is a well environment that there is no much
intrusion to have a better connection.
3. HARDWARE INSTALLATION
3.1 LED Indicator
Link
The Link LED indicator lighted green when the NetFly PCI 54 Wireless
Adapter is connected to wireless network successfully.
3.2 Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of
the network link can be seen instantly:
1.
Once the device is plugged to the station's CardBus/PCI slot, the
LED of the Wireless LAN Adapter will light up indicating a normal
status.
2.
When the device plugged to the station's CardBus/PCI slot and
the driver was installed, the ACT will start alternate blinking, it
means that the device is starting to scan the wireless devices near
the Wireless LAN Adapter.
3.
While the Wireless LAN Adapter linked up and transmitting data to
the Access Point or to other Wireless LAN station, the Link LED
will lighted green.
4. SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the Wireless LAN
Adapter.
4.1 Utility and Driver Installation for Windows
1.
Insert the CD-ROM and the Auto-run program will appear.
Alternatively, open a file browser and double click on the
autorun.exe file located in the CD directory. In some specific
setting on Windows system, you may need to proceed the
software manually, go to your Windows Start menu and choose
Run,
"D:\PCI\XP2K\Setup.exe"in the dialog box and click OK.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
type
"D:\PCI\Vista\Setup.exe"
NetFly PCI 54
USER MANUAL
or
9
Advertisement
Table of Contents
