9
Inserting the needle
Needle system 134 KK
Switch off machine!
1 0
Winding the bobbin thread
.1
Place a bobbin on winder spindle 1 (Fig. 1).
.2
Press winder spindle 1 inwards
- Winder is engaged
.3
Thread up as shown in Fig. 2 and wind thread a few turns around bobbin.
.4
Bobbin is filled during sewing.
.5
To regulate the amount of thread: pin 2 (screw 3)
Note:
If bobbin is wound unevenly, position thread guide 4 according (nut 5) and regulate
winding tension (chapter 11).
1 1
Regulating the winding thread tension
Knurled washer 6 (Fig. 2)
+ = increase
- = decrease
12 PFAFF