NETGEAR RangeMax Next Wireless Router WNR834M Reference Manual page 33

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual
5. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog displays.
Figure 3-8
6. In the Available Wireless Cards list, either select from the list of available wireless cards the
WNR834M has found in your area, or enter the MAC address and device name for a device
you plan to use. You can usually find the MAC address printed on the wireless adapter.
Note: You can copy and paste the MAC addresses from the firewall's Attached
Devices menu into the MAC Address box of this menu. To do this, configure
each wireless computer to obtain a wireless link to the firewall. The computer
should then appear in the Attached Devices menu.
7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen.
8. Repeat step 5 to step 7
9. Be sure to click Apply to save your Wireless Card Access List settings.
Now, only devices on this list are allowed to wirelessly connect to the WNR834M.
Wireless Configuration
for each additional device you wish to add to the list.
v1.3, May 2006
3-13