Philips FW-C330 Service Manual page 3

SPECIFICATIONS
GENERAL:
Mains voltage : 110-127V/220-240V Switchable for /21M
220-230V for /22/30/33/34
Mains frequency : 50Hz
50/60Hz for /21M
Power consumption : < 35W Active
< 15W at Standby with Clock on
< 1W at ECO Standby /22
Clock accuracy : < 4 seconds per day
Dimension centre unit : 265 x 310 x 365mm
TUNER:
FM
Tuning range : 65.81-74.0MHz for /34
87.5-108MHz for /21M/22/30/34
Grid : 50kHz
30kHz(switchable) for /34
50kHz(switchable) for /34
100kHz for /21M
IF frequency
Aerial input
Sensitivity at 26dB S/N
Selectivity at S9/300kHz bandwidth : > 25dB
IF rejection
Image rejection
Distortion at RF=1mV, dev. 75kHz
-3dB Limiting point
Crosstalk at RF=1mV, dev. 40kHz
MW
Tuning range
Grid
IF frequency
Aerial input
Sensitivity at 26dB S/N
Selectivity at 18kHz bandwidth
IF rejection
Image rejection
Distortion at RF=50mV, m=80%
: 10.7MHz ± 20kHz
: 75Ω coaxial
: < 22µV
: > 60dB [80dB]
: > 25dB [75dB]
: < 3%
: < 23.5dBf
: > 18dB
: 531-1602kHz
530-1700kHz for /21M
: 9kHz
10kHz for /21
: 450kHz ± 1kHz
: Frame aerial
: < 4.4mV/M [4.0mV/M]
: > 18dB
: > 45dB
: > 28dB
: < 5%
1-3
AMPLIFIER:
Output power
Frequency response ±3dB±5%
Dynamic Bass Boost
Digital Sound Control
Headphone output, R
Input sensitivity, R = 600Ω
S
CASSETTE RECORDER:
Number of track
Tape speed
Wow and flutter
Fast-wind/rewind time C60
Bias system
Rec/Pb frequency response within 8dB
Signal to noise ratio
COMPACT DISC:
Measurement done at output conn. of the CDC module.
Frequency response within ± 1.5dB : 20Hz - 20kHz
Output level (in Vrms)
Signal/Noise ratio (A-weighted)
Distortion at 1kHz
Channel unbalance at 1kHz
Channel separation at 1kHz
De-emphasis : 0 or 15/50 mS (Switched by subcode
{....} Values for /21M/33 only
[....] Values for Cenelec Tuner only
6Ω, 1kHz, 10% THD
1)
Frequency response in each setting is software controlled.
2)
: 2 x 20W
1)
: 60Hz-16kHz
: DBB Off, DBB 1, DBB 2, DBB 3
: Jazz, Techno, Optimal, Rock
= 32Ω : 15mW ± 2dB
LOAD
Aux / CDR : 500mV / 1.0V
Mic : {3.5mV}
: 2 x 2 stereo
: 4.76 cm/sec +2.5/-1.5%
: < 0.4% DIN
: 130 sec
: 78kHz ± 10kHz
: 80Hz - 12.5kHz
Type I : > 48dBA
: 500mV ± 1dB, R = 100Ω
out
: > 80dBA
: < 0.003%
: ±1dB
: > 70dB
on the disc)
RMS
3)
3)