Table of Contents
Summary of Contents for ThinkGizmos TG21 ROBOVAC XD
- Page 1 TG21 ROBOVAC XD User Manual English Deutsch p 25 Francais p 49 Italiano p 73 CONGRATULATIONS ON OWNING THIS ROBOVAC XD. PLEASE READ THIS MANUAL BEFORE USE & SAVE FOR FUTURE Español p 97 REFERENCE AS IT INCLUDES IMPORTANT SAFETY ADVICE.
-
Page 2: Table Of Contents
ENGLISH MANUAL - CONTENTS FEATURES OF THE ROBOVAC XD 1.1 Vacuum Features ....................3 SAFETY INSTRUCTIONS 2.1 Safety Instructions ....................4 2.2 Safety Instructions Continued ................5 2.3 Safety Instructions Continued ................6 ROBOVAC XD INFORMATION 3.1 Cleaning Modes ....................7 3.2 Packing List ...................... -
Page 3: Features Of The Robovac Xd
1. FEATURE OF THE ROBOVAC XD 1.1 Vacuum Features Frequency Conversion Technology Using this technology to adjust the cleaning speed depening on different working environments, will use less power and produce less noise. Bluetooth Wireless Remote Controller You don’t have to point at the vacuum to operate and can use it more conveniently. The remote controller also has the direction control function using the rocker handle. -
Page 4: Safety Instructions
2. SAFETY INSTRUCTIONS 2.1 Safety Instructions To reduce the risk of injury or damage, you should keep the safety instructions in mind when using the vacuum. Basic Safety Instructions After reading, please keep this manual safe. This is a safety warning symbol. It alerts that there is potential danger, which may cause property damage, severe personal injury or even death. -
Page 5: Safety Instructions Continued
2.2 Safety Instructions Continued WARNING Do not let small children or Do not touch the power plug pet sit or stand on the robot. with wet hands. Do not operate the robot when objects are on the robot. Or may cause product electric shock. -
Page 6: Safety Instructions Continued
2.3 Safety Instructions Continued WARNING Do not let the bottom frame Do not let the robot pick up and charging terminals liquids, blades, thumbtacks, of charging base contact kindling etc. metallic objects. Or may cayse product Or may cause product failure. -
Page 7: Robovac Xd Information
3. ROBOVAC XD INFORMATION 3.1 Cleaning Modes (1) Auto Cleaning Mode The robot will clean automatically in diff erent kinds of cleaning paths till it returns to the charging base to recharge. (2) Spot Cleaning Mode The robot will spiral approximately 2.4 meters in diameter, intensively cleaning a localized area. -
Page 8: Packing List
3.2 Packing List Main Body (1pcs) Charging Base (1pcs) Virtual Wall (1pcs) Remote Controller (1pcs) (Battery not included) (Battery not included) Side Brush (2pcs) Power Adaptor (1pcs) Mop (2pcs) User Manual (1pcs) -
Page 9: Main Body Anatomy
3.3 Main Body Anatomy Decorative Panel Front Cover IR Receiver Display Screen Bin Release Button Rubber Bumper Transparent Window Power Switch DC Jack Top View Universal Wheel Charging Contact Piece UV Lamp Battery Cover Side Brush Left/Right Wheel Main Brush Dusting Brush Mop Plate Dust Bin... -
Page 10: Remote Controller
3.4 Remote Controller Charge Power Indicator Power Power Button Power Forward Power Indicator Press any button, if this indicator lights, it means the remote controller works. Left Right Charge Press this button, the robot will look for the charging base to recharge. Back Auto Press this button, the robot will enter into... -
Page 11: Virtual Wall
3.7 Virtual Wall Power Switch Signal Window Signal Light Installing Virtual Wall Batteries After inserting the clasp Lift the cover of the Install 2x C Type batteries of the cover into the slot, virtual wall. into the virtual wall as shown push the other end to above. -
Page 12: Display Screen
3.9 Display Screen Indicator Instructions Auto Cleaning Light Spot Cleaning Light Day Light (Monday , Tuesday etc) UV Light Power Light Time/Error Code Light Touch Buttons CLEAN 1. CLEAN Press this buttom, the robot will enter into auto cleaning mode. 2. -
Page 13: How To Use
4. HOW TO USE 4.1 Setting Current Time 1. Setting the ‘Day’: 2. Setting the ‘Hour’ and ‘Minute’. A. Switch the machine on with the switch A. Once the day is set press the SCHEDULE on the side, you should see the main button again to move through to the time, screen turn on with all the lights lit and it the digit you are currently on should flash. -
Page 14: How To Charge
4.2 How to Charge 1. Auto-Recharging When the cleaning work is done or the battery power is running low, the robot will return to the charging base to recharge automatically. Note: If affected by obstacles, low power or a complicated environment, the robot may not be able to return to the charging base for automatic recharging. -
Page 15: How To Start And Pause Cleaning
4.3 How to Start and Pause Cleaning 1. Start Cleaning Turn on the power switch. Touch CLEAN button, the robot will enter into auto cleaning mode. The AUTO light is always on until the robot returns to the charging base to recharge. 2. -
Page 16: How To Use The Virtual Wall
4.5 How to use the Virtual Wall The Virtual wall is used to prevent the robot from entering off-limit areas. It can create a 4-meter length strip to separate two areas, such as in front of doors, doorways or where there are applicances or other fragile objects. -
Page 17: Maintenance
5. MAINTENANCE Before performing the robot maintenanee, please ensure the power switch is off. 5.1 Cleaning the Dust Bin If the dust bin is full, the suction power will be weakened. Please empty the dust bin before and after every use. Please follow the steps below: Use a cleaning brush to Press the bin release Hold dust bin with both... -
Page 18: Cleaning The Main Brush And Dusting Brush
5.2 Cleaning the Main Brush and Dusting Brush Excessive build up of hair in the brushes can damage the robot. Please clean the brushes at least once per week. Lift up the right side of Turn the robot over and Remove the brush guard by the brushes and take put it on a smooth soft... -
Page 19: Cleaning The Side Brushes
5.4 Cleaning the Side Brushes Excessive build up of hair in the brushes can damage the robot. Please clean the brushes at least once per week. After drying the side Turn the robot over Pull out the side brushes brushes in a well- and put it on a smooth and wash them ventilated place avoiding... -
Page 20: Cleaning The Right And Left Wheels
5.7 Cleaning the Right and Left Wheels Pull out the connection Turn the robot over and Remove the fixed screws shaft in the middle of the put it on a smooth soft from the right and left right and left wheels. and level surface, remove wheels with a screwdriver. -
Page 21: Additional Information
6. ADDITIONAL INFORMATION 6.1 Troubleshooting Error Codes Problem What to do E001 Dust bin or fan doesn’t work Please check the installation of the dust properly. bin and fan module. E002 The central brushes don’t Please remove and clean the central work properly. -
Page 22: Specifications
6.3 Specifications Main Body Dimensions 360x92mm Weight 3.5kgs Rated Power 18-30W Rated Voltage DC14.8V Working Time About 120mins Charging Voltage/Current DC24V 1A Noise Level 48dB Capacity of Dust Bin About 800ml Battery Type DC 14.8V 2200mAh Lithium Ion Battery Max Speed About 300mm/sec Min Speed About 150mm/sec... -
Page 23: Warranty
Product to you. Do not return the item to the original place of purchase, please contact Think Gizmos direct. Think Gizmos, Unit 19, Lawson Hunt Industrial Park, Broadbridge Heath, West Sussex, RH12 3JR Tel.: +44/(0)203 384 8304 help@thinkgizmos.com ● www.thinkgizmos.com... - Page 24 It is possible to request a full copy of Declaration of compliance from the Distributor: This product complies with the rules of RoHS Directive(2011/651EU) This product complies with the rules of Eup Directive(2009/125/EC) Thinkgizmos is a registered trademark of Paramount Zone Ltd...