Sony RDR-GX315 Service Manual page 13

QQ
3 7 63 1515 0
Step 3: Connecting to Your TV
Connect the supplied audio/video cord to the LINE OUT 1 (AUDIO L/R/VIDEO) jacks of the recorder.
To enjoy higher quality images, connect an S video cord (not supplied) instead of the yellow (video) plug.
When using this connection, be sure to connect the audio cord to the LINE OUT 1 (AUDIO L/R) jacks.
Audio/video cord
(supplied)
(red)
DVD recorder
: Signal flow
When playing "wide screen" images
Some recorded images may not fit your TV screen. To change the picture size, see page 76.
Notes
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
• Do not connect your TV's audio output jacks to the LINE IN (AUDIO L/R) jacks at the same time. This will cause
unwanted noise to come from your TV's speakers.
TE
L 13942296513
Step 4: Connecting to Your AV Amplifier (Receiver)
Select one of the following patterns A or B, according to the input jack on your AV amplifier (receiver).
This will enable you to listen to DVD audio tracks through your AV amplifier (receiver).
(red)
DVD recorder
Optical digital cord (not supplied)
[Speakers]
Rear (L)
www
Front (L)
Center
.
: Signal flow
http://www.xiaoyu163.com
INPUT INPUT
TV or projector
AUDIO
R L VIDEO S VIDEO
(red) (white) (yellow)
S video cord
(not supplied)
(white) (yellow)
to LINE OUT1
(VIDEO/AUDIO L/R)
to LINE OUT (S VIDEO)
Audio cord
INPUT
(white)
(not supplied)
L
AUDIO
(red)
R
(white) AV amplifier (receiver)
to LINE OUT 2 (AUDIO L/R)
to DIGITAL OUT (OPTICAL or COAXIAL)
or
Coaxial digital cord
(not supplied)
[Speakers]
to optical to coaxial
digital input digital input
Rear (R)
Front (R)
x ao
AV amplifier (receiver)
y
with a decoder
Subwoofer
i
http://www.xiaoyu163.com
8
If your TV has component video input jacks
Connect the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three
video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and
high quality images.
If your TV accepts progressive 480p format signals, you must use this connection and then set
"Progressive" of "Video" to "On" in the "Setup" display (page 77). The PROGRESSIVE indicator lights
up when the recorder outputs progressive signals.
When using this connection, be sure to connect the audio cord to the LINE OUT 1 (AUDIO L/R) jacks.
Audio/video cord (supplied)
to LINE OUT1
(AUDIO L/R)
Q Q
3 6 7 1 3
,
15 16
A Connecting to audio L/R jacks
This connection uses a stereo amplifier's
(receiver's) two front speakers for sound.
You can enjoy the surround function that creates
virtual speakers from two stereo speakers. Select
from "Surround1," "Surround2," or "Surround3"
of the surround effects (page 33).
A Surround 1
Surround 2
Surround 3
B Connecting to a digital audio input jack
Use this connection if your AV amplifier
(receiver) has a Dolby
and a digital input jack. You can enjoy the
surround effect of Dolby Digital (5.1ch) or DTS
B
(5.1ch).
u163
.
*1
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
,
17 18
1-3
2 9 9 4 2 8
COMPONENT VIDEO IN
INPUT
TV or projector
AUDIO L
R Y P
B
(green) (blue)
(red) (white)
(red) (white)
(red) (blue)
DVD recorder
: Signal flow
1 5 0 5 8 2 9 9 4
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
z Hint
For correct speaker location, see the operating
instructions supplied with the connected components.
Notes
• After you have completed the connection, make the
appropriate settings under "Audio Connection Setup"
in Easy Setup (page 22). Otherwise, no sound or a loud
noise will come from your speakers.
• With a coaxial or optical digital connection, you cannot
use the virtual surround effects of this recorder.
• The recorder cannot play Linear PCM soundtracks of 2
channels or more.
• When outputting from the DIGITAL OUT jacks, you
cannot switch the bilingual sounds on a DVD-RW (VR
mode) by pressing AUDIO.
Virtual speaker
*1 *2
Digital or DTS decoder
m
co
9 9
P
R
(red)
Component video cord
(not supplied)
(green)
to COMPONENT
VIDEO OUT
2 8 9 9