Pioneer avr-w6100 Service Manual page 55

5
[Displays in each mode]
In the following figures, the letters and numbers surrounded by a large square are for OSD examples.
On the screen, the adjustment names and the settings (or written data) are listed.
The settings (or written data) will change when some adjustments are made in each mode.
(The following examples show the maximum values.)
(1) Flicker adjustment mode
Adjustment item
Common reverse output center
(2) Line adjustment 1 mode
Adjustment item
Bright (SA22: B7-2)
Contrast (SA25: B7-1)
Common reverse output center
Common reverse output amplitude
Output clamp DC
γ 0 inflection point
γ 3 inflection point
γ 2 inflection point
γ 1 inflection point
Notes:
1) CONTRAST data
The CONTRAST data is adjustable, and used as reference data for other adjustment items,
which is not memorized in the EEPROM.
2) BRIGHT and COM AMP data
The BRIGHT and COM AMP adjustments are made by using the same 2-screen IC register
(SA22h B7-2: common reverse output amplitude).
Therefore, adjusting one of the data will change the other one.
5
6
Settings or
Adjustment
Adjustable name written data
range
[0 - 255] COM DC
Settings or
Adjustment
Adjustable range written data
item
[0 - 63] BRIGHT
[0 - 127] CONTRAST
[0-255] COM DC
[0-63] COM AMP
[0-63] RGB BIAS
[0-15] GAMMA0
[0-15] GAMMA3
[0-15] GAMMA2
[0-31] GAMMA1
AVR-W6100/UC
6
7
(DEC)
255
(DEC)
63 LINE1
127
255
63
63
15
15
15
31
CS FF
7
8
A
B
C
D
55
8