NETGEAR DM602 Reference Manual page 42

Reference Manual for the Model DM602 ADSL Modem
This screen shows the following parameters:
Table 5-1. Router Status Fields
Field
Firmware Version
LAN Port
MAC Address
IP Address
IP Subnet Mask
Modem
ADSL Firmware Version
Modem Status
Connect Mode
Down Stream
Up Stream
VPI
VCI
5-2
Description
This field displays the modem firmware version.
These IP parameters apply to the Local Area Network (LAN) of the
modem.
This field displays the Ethernet MAC address being used by the LAN
port of the modem.
This field displays the IP address being used by the ADSL (WAN) port of
the modem. If no address is shown, the modem cannot connect to the
Internet.
This field displays the IP Subnet Mask being used by the ADSL(WAN)
port of the modem.
These parameters apply to the ADSL modem section of the modem.
This field displays the ADSL chipset firmware version.
This field displays the state of the ADSL connection to your service
provider, either "Connecting" or "Connected"
This field displays the protocol used to connect to your service provider.
When the ADSL link comes up, the connection will be either "Fast" or
"Interleaved", depending on the way the telephone company has
configured its equipment
This field displays the connection rate from the service provider to the
modem in bits per second
This field displays the connection rate from the modem to the service
provider in bits per second
This field displays the VPI entered in the Setup Wizard or Basic Settings
screen
This field displays the VCI entered in the Setup Wizard or Basic Settings
screen
Advanced Configuration of the Modem