Sistore Remote View - Siemens SISTORE MX Installation Manual

Installation

8.4.1.2 SISTORE Remote View

30
Siemens Building Technologies
Fire Safety & Security Products
CKA4810 interface configuration
Protocol: SIMATRIX RS232 or SIEMENS IVM
Baud rate: 9600
Parity: None
Fig. 14 S ISTORE RemoteView
T
For a more detailed description of the connections please refer to Section
MX / MX DVD or Section 7 D escription of SISTORE MX 3G / MX 3G DVD.
9 5 H 9 6 H
Prerequisite:
The CKA driver is installed and the icon
Section 9 .3 S ubsequent installation of software components.
9 7 H 9 8 H
1. Connect the CKA4810 control panel to the client PC (see
2. Configure the COM1A connection on the control panel for use as an RS232
interface.
Further information on this can be found in the instruction manuals for the
control panel CKA4810 and the converter.
3. Start the SISTORE RemoteView application software.
4. Switch to configuration mode.
5. Select the System tab.
6. Mark the checkbox
in the SISTORE MX Configuration Manual.
7. Click Apply.
The interface for the control panel is enabled.
Connections
Signal
GND
RXD
TXD
– C KA4810 system overview
T T
is displayed in the task bar. See
C CTV keyboard Further information on this can be found
.
T
Client PC
SISTORE RemoteView
5
3
2
6 D escription of SISTORE
9 3 H 9 4 H
F ig. 14).
9 9 H
CKA4810
9-pin Sub-D plug
5
2
3
02.2009