Download Print this page

Advertisement

Quick Links

WWW.SHARKCLEAN.COM
S3501SP N2
OWNER'S GUIDE

Advertisement

loading

Summary of Contents for Shark S3501SP N2

  • Page 1 WWW.SHARKCLEAN.COM S3501SP N2 OWNER’S GUIDE...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 11. DO NOT unplug by pulling on 22. Never use the Steam Mop without For Household Use Only power cord. To unplug, grasp the micro-fiber cleaning pad attached. plug not the power cord. Do not 23. Keep your work area well lit. use extension cords or outlets WARNING: WHEN USING YOUR SHARK ® with inadequate current carrying 24. Store the Steam Mop indoors in a STEAM MOP, BASIC SAFETY capacity. cool, dry place. TO REDUCE THE RISK OF FIRE, PRECAUTIONS SHOULD 12. DO NOT put any objects into 25. To avoid circuit overload, do not...
  • Page 3: Quick Start

    Quick Start DIRT CAN’T HIDE ON When assembling your Steam Pocket ® EITHER SIDE! All new Mop there may be a little water in or design allows for optimal around the water tank. This is because cleaning! When one side we test all our Steam Pocket ® Mops of the pocket gets dirty, 100% before you buy them, so you get just turn the mop head a quality Shark Steam Pocket Mop. ® ® over and clean with the other side of the pocket. QUICK TIP: For easier pushing and pulling, extend the handle length. ASSEMBLE 1 Insert the mop handle into the...
  • Page 4: Table Of Contents

    Using Your Steam Pocket Mop ........6 ® Shark ® Steam Care of Your Steam Pocket ® Mop ........8 Pocket Mop. ® Ordering Replacement Parts ...........10 Troubleshooting Guide ............11 Warranty and Registration ..........13 This manual covers model number: S3501SP N2 11 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1550 Watts Water Capacity: 450 ml (15 oz.) TOLL FREE: 1-800-798-7398 www.sharkclean.com...
  • Page 5: Getting Started

    Getting Started When assembling your Steam Pocket ® Mop there may be a little water in or around the water tank. This is because we test all our Steam Pocket Mops ® 100% before you buy them, so you get a quality Shark ® Steam Pocket ® Mop. IMPORTANT: Always make sure the ASSEMBLE a 2 All Purpose Cleaning Pads c Quick Release Swivel Cord Wrap 1 Insert the mop handle into the pump mop is UNPLUGGED from the wall b Filling Flask d Cord Clips actuator (the tube that leads to the when not in use. Never fill the mop, e Mop Handle tank). Push the mop handle and attach the mop head, change or pump actuator together in until you remove the micro-fiber pocket when f Telescopic Handle Latch hear it click into place.
  • Page 6 Getting Started Calcium and mineral deposits can build up and impact the performance of your steam mop over time. To extend the life of your product we recommend that you use distilled water or Shark ’s ® Water Filtration Bottle. Visit www.sharkclean.com to order. 3 Snap the mop head into the base to IMPORTANT: Do not use on unsealed 5 For your comfort, you can adjust the QUICK TIP: For easier pushing and secure it. Press the release button to wood or unglazed ceramic floors. height of the mop. Just lift the latch pulling, extend the handle length. exchange mop heads. On surfaces that have been treated on the tube 90 degrees to the open with wax or some no wax floors, position. Holding the handle, extend 4 Turn the water tank cap counter the sheen may be removed by the tube to the height that’s right for clockwise and remove from the tank. the heat and steam action. It is you and then close latch to locked Use the filling flask and pour water always recommended to test an position. into the tank. Please do not overfill. isolated area of the surface to be Replace the cap on the water tank by cleaned before proceeding. We...
  • Page 7: Steam

    Using Your Steam Pocket ® IMPORTANT: Do not use the mop without attaching a micro-fiber pocket and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. Just pump the handle a few times in a downward motion to prime the pump. 3 When one side of the micro-fiber 4 When the water tank is empty, pocket gets dirty, just flip the mop the Steam Pocket Mop will stop ® NOTE: Make sure the floors are 2 Pump the handle a few times in a head and you can quickly start using producing steam. You can refill the swept or vacuumed before using the downward motion. This pumping the other side. water tank at any time as long as the Steam Pocket ® Mop. action will release steam as you mop is unplugged from the outlet. IMPORTANT: Please wait 3-5 minutes mop and allows you to customize Follow the instructions from 1 Pull and twist the quick release cord for the Steam Pocket...
  • Page 8: Care Of Your Steam Pocket

    ® Mop, unplug the cord from the outlet and let the unit cool 2-3 minutes. Release steam by pumping the handle several times before removing the micro-fiber Steam Pocket ® from the mop head. CARE OF YOUR MICRO-FIBER DECALCIFYING YOUR STEAM MOP CLEANING PAD Calcium and mineral deposits can Remove the micro-fiber Steam 3 To store the Shark ® Steam Pocket ® 1 We recommend washing your build up and impact the performance Mop hanging up; first remove the of your steam mop over time. Pocket ® by releasing the quick micro-fiber Steam Pockets ® head (after it has cooled and the...
  • Page 9: Ordering Replacement Parts

    Ordering Replacement Parts Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Your Steam Pocket ® Mop should be securely plugged into a 120V AC electrical outlet only. The Steam Pocket ® Mop will not turn on. Check your fuse or breaker. If your unit still doesn’t work, give us a call 1-800-798-7398. Prime the pump, see page 6 for more information. Is there water in the water tank? If not, add water to your Steam Steam Pocket ® Mop will Mop following instructions on page 4. not make steam. If the unit still does not make steam, follow the decalcification instructions on page 9. Check to see if your micro-fiber Steam Pocket ® is too wet. We Steam Pocket ® Mop recommend you unplug the Steam Pocket Mop and change the ®...
  • Page 10 Product Registration Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark product within ten (10) ® days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
  • Page 11 EURO-PRO Operating LLC U.S.: Newton, MA 02459 Canada: Ville St. Laurent, Québec H4S 1A7 1-800-798-7398 www.sharkclean.com Copyright © Euro-Pro Operating LLC 2011 Printed in China Illustrations may differ from actual product. S3501SP_N2.E.110927.1...