Repeat Mode - Atlantis Land A02-WAP-54G Manual

Atlantis land wireless 108mbps multi-function access point manual

Hide thumbs Also See for A02-WAP-54G:

Table of Contents

3.8.4 Repeat Mode

Configure the AP to Repeater mode; the AP will be a wireless LAN repeater that

will be extended the WLAN coverage range.

AP Mode: Select Repeat Mode.

Click Site Survey.

Chose the correct Wireless network, then click on Connect.

You must make sure that Encryption is set the same as that AP you wish

to connect.

When Repeat Mode is enable only WEP ecryption is supported.

Wireless 108Mbps Multi-Function Access Point

A02-WAP-54G

Pag. 33

Table of Contents