Table of Contents
Advertisement
Thank you for purchasing the IEEE 802.11g Wireless USB Adapter that
provides the easiest way to wireless networking. For more detailed
instructions on configuring and using the Wireless USB Adapter,
please refer to the online manual.
1.1 System Requirements
Before installing the Adapter, your PC should meet the following:
•
Desktop PC with available USB V2.0 or V1.1
•
Intel® Pentium®III 600Mhz or compatible processor with
128MB RAM
•
Windows 98SE/ME/2000/XP/VISTA Operating System
•
Minimum 15 Mbytes free disk space for installing the driver and
utilities
•
CD-Rom drive
1.2 Package Contents
Unpack the package and check all the items carefully. If any item contained
is damaged or missing, please contact your local dealer as soon as possible.
Also, keep the box and packing materials in case you need to ship the unit in
the future. The package should contain the following items:
•
One IEEE802.11g Wireless USB Adapter
•
One A-type USB male to female extension cable
•
One Quick Start Guide
•
One CD with driver/utilities and user's manual
1.3 Connecting the USB Extension Cable
The USB extension cable that comes with the Adapter has Type A
connectors on both ends. One is a male Type A connector that plugs into the
PC's USB port, and the other is a female Type A connector that plugs into
the Adapter.
This USB extension cable have a special function, it can be twist to any
direction to have the best connection in the air. It is recommended that the
Pen Size Wireless USB Adapter was vertically plane with the ground.
WIRELESS USB ADAPTER
When plug the device in the USB 1.1/1.0 port,
the real throughput will be up to 6Mbps only
when running 11Mbps or higher speed
Advertisement
Table of Contents
