Installation Procedure; Flip Scale; Flip Scale Spring; Flathead Screw M4 X 12 - Ricoh FT5580 Service Manual

12 June 1987

2. Installation Procedure

1. Remove all the external strips of tape [A].
2. Turn off the main switch of the copier, and exchange the following
parts:
Remove
Left Scale [B]
Pan Head Screw - M4 x 6 [F]
Pan Head Screw - M4 x 8 [H]
NOTE:
3. Remove the copier rear cover [J] (2 screws) and the plastic cap [K].
I f t h e p l a t e n c o v e r h a s b e e n m o u n t e d o n t h e m a c h i n e ,
remove the platen cover and the two stud screws.
Install
Exit Guide [C]
Flip Scale [D]
Flip Scale Spring [E]
2 Flathead Screw - M4 x 6 [G]
2 Flathead Shoulder
Screw - M4 x 8 [I]
5-2