NETGEAR CG814WG V3 Reference Manual page 12

Wireless Cable Modem Gateway CG814WG v3 Reference Manual
You can use the LEDs to verify connections.
panel of the CG814WG v3 Gateway.
Table 1-1. LED Descriptions
LED Description
Power • On: Power is supplied to the gateway.
• Off: Power is not supplied to the gateway.
Cable Link • On (green): Configuration of the cable interface by your cable service provider
is complete.
• Off: Configuration of the cable interface is still in progress.
Upstream • Blink: Data is being transmitted to the cable interface.
Traffic • Off: The cable interface is idle.
Downstream • Blink: Data is being received from the cable interface.
Traffic • Off: The cable interface is idle.
Wireless • On: The wireless Access Point is operating normally.
Blink: Data is being transmitted or received on the wireless interface.
LAN • On (green): The port has detected link with a 100 Mbps device.
(Local Area • Blink (green): Data is being transmitted or received at 100 Mbps.
Network) • On (yellow): The Local port has detected link with a 10 Mbps device.
• Blink (yellow): Data is being transmitted or received at 10 Mbps.
• Off: No link is detected on this port.
1-2
Table 1-1 lists and describes each LED on the front
Connecting the Gateway to the Internet
v1.0, June 2007