Zotac ZBOX User Manual page 15

5. Connecting to a DVI or VGA display
Connect one end of a DVI/VGA cable to an HDTV or monitor, and the other end
to the DVI port on the system rear panel. If using a VGA connection, please use
included DVI-to-VGA adapter.
6. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel and
the other end to a HDMI-compatible display such as an HDTV or monitor.
7. Connecting a Bluetooth antenna module
Connect a bluetooth antenna module to the bluetooth antenna connector.
8. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the

AC outlet to save on power consumption.
ZOTAC ZBOX
15