Removing The Needle Retaining Spring; Fitting The Needle Retaining Spring - Brother Model KH--830 Service Manual

2. Needla come to move
li&h
tly in
part
I.
Needle retaining spring is broken
Not<llepr .... r
Remmna tbe needle
rebiDinJ
1priDg
I. Tab out the machlne body from the case (See Page 21 ).
2. Pull out tho sponge bar.
3. PiaU
out the needle presser.
4. Bring foiWird the plain needlea to E-posltlon.
5. Remov. three
bindins
acrews for the needle retaining spring on
the comb and the needle retaining spring will come off.
6.
Remov. the needle retaining spring from the comb, and puU
out the spring.
•
-36-
Fig. 36
Fitting the needle ret.inin aprinJ
I . Fit the needle retaining spring onto the comb and futon the
needle retaining spring on comb with three binding screws for
the needle retaining spring.
2. Bring back the needles to B·pocition.
3. Put the needle presser.
4.
Plat the sponge bar.
5. Keep the machine body in the case. (See Page 33)