Table of Contents
Advertisement
605 to RJ-11 adapter
The 605 to RJ-11 adaptor is provided to comply with the older 610
Telstra wall socket. The 605 to RJ-11 adapter may be used to convert the
supplied RJ-11 cable, if the older connection is required.
USB cable
A typical USB cord has an "A" connection ("upstream" to plug into the
computer) and a "B" connection ("downstream" to plug into the
device).
By using different connectors on the upstream and downstream ends, cable connection is
simplified. The "B" connection will fit a into the "B" socket of any USB device. Similarly, any
"A" connector can be plugged into any "A" socket, such as on a computer.
"A" Connection
If it is a new device, the operating system auto-detects it and asks for the driver disk. If the
device has already been installed, the computer activates it and starts talking to it. USB devices
can be connected and disconnected at any time.
9 Pin (RS-232 ) Serial Cable
A 9 Pin (RS-232) Serial Cable may be used to connect to a serial console terminal or a PC
running a terminal emulation program, such as Hyper Terminal.
Male Connector
YML725 Rev1
www.netcomm.com.au
Pin No
Name
1
DCD
2
RD
3
TD
4
DTR
5
SGND
6
DSR
7
RTS
8
CTS
9
RI
NB620W Super-G Wireless Broadband Gateway User Guide
"B" Connection
Notes/Description No.
Data Carrier Detect
Receive Data (a.k.a RxD, Rx)
Transmit Data (a.k.a TxD, Tx)
Data Terminal Ready
Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
77
Advertisement
Table of Contents
