Using Bravia Sync With Control For Hdmi - Sony bravia klv-40x450a Operating Instruction

To display a photograph
– Picture Frame
You can display a photograph on the screen for
a selected period of time. After that period, the
TV automatically switches itself into standby
mode.
1
Select a photograph.
You can select a photograph from the
connected USB device or preset picture
folder. For details on selecting a
photograph, see page 21.
2
Press OPTIONS while the selected
photograph is displayed, then press F/f to
select "Picture Frame Image" and press
.
3
Press RETURN repeatedly to return to
the Home Menu.
4
Press G/g to select "Photo", then select
"Picture Frame" and press
The TV is switched to Picture Frame
mode, and the selected photograph is
displayed on the screen.
To set the duration of displaying a
photograph
Press OPTIONS, then select "Duration"
and press . Then, select the duration,
and press .
The counter appears on the screen.
To return to the XMB
Press RETURN.
~
• If the photograph is selected from a USB device, it
must remain connected to the TV.
• If "Sleep Timer" is activated, the TV
automatically will switch into standby mode.
.
™
Using BRAVIA Sync with
Control for HDMI
The control for HDMI function enables the TV
to communicate with the connected equipment
that is compatible with the function, using
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment
that is compatible with control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
• If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
• Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
• You can operate the connected Sony
equipment that has the BRAVIA Sync logo
by the TV remote by pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g,
and RETURN.
– OPTIONS to display "Device Control", then select
options from "Options" and "Content List" to
operate the equipment.
– Refer to the instruction manual of the equipment for
available control.
• If "Control for HDMI" of the TV is set to
"On", "Control for HDMI" of the
connected equipment is also automatically
switched to "On".
, colour buttons,
23
(Continued)
GB