Lennox Elite EDV3530CNM-B Care And Operation Instructions Manual page 13

1
2
4
6
1
Align Groove At The Bottom
Locating Pins
Of Log (1) Over The Grate And
Push It Towards The Rear.
2
Align The Holes In One End Of Logs 2 & 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
EDV3530 LOG PLACEMENT
3
5
Locating Pin
3
Figure 7
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number Description
1 Log, Rear
2 Log, Diagonal/Left
3 Log, Diagonal/Right
4 Log, Front/Left
5 Log, Top/Right
6 Log, Front/Center
Catalog Number for the entire log set: 55M02
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
4
Align The Groove In The Bottom Of Log (4) Over
The Grate And Slide It Toward The Front.
6
Position The Grooves On Log (6)
Against The Grate As Shown
Part
Number
55M06
55M07
55M08
55M09
55M10
55M11
5
13