Adjustment
12
Opening up the sewing head
.04
● Remove cover 1 (screws 2, 4 ea).
● Remove cover 3 (screws 4).
● Unscrew screw 5 and swing out the cover plate.
● Swing the control panel aside. If necessary loosen the terminal screws.
● Open up the sewing head and protect it from falling back down with support 6.
● To replace the sewing head repeat the steps in reverse order.
12 - 2
Turn off the compressed air supply!
Switch off the machine and take measures to prevent it being switched on
again!
The opened sewing head must be prevented from falling back down with support 6!
If the sewing head falls down suddenly there is a danger of being crushed between
the sewing head and table top!
5
Fig. 12 - 01
4
6
2
2
4
3
1