Playing A File - Sony MHC-V11 Operating Instructions Manual

Playing a file

The following audio file formats are
supported:
—MP3: file extension ".mp3"
—WMA: file extension ".wma"
1
Press FUNCTION repeatedly
until "USB" appears on the
display.
2
Connect the USB device to the
(USB) port.
3
Press  to start playback.
4
Press VOL +/– to adjust the
volume.
Other operations
To
Pause
playback
Stop
playback
Select a
folder
Select a file
Find a point
in a file
Select Repeat
Play
Change the
play mode
20
GB
Do this
Press . To resume
play, press .
Press . To resume
play, press 
. To
1)
cancel resume play,
press  twice.
Press +/–
repeatedly.
Press /.
Hold down /
during playback, and
release the button at
the desired point.
Press REPEAT/FM
MODE repeatedly
until "REP ONE ," "REP
2)
FLDR " or "REP ALL
3)
appears on the display.
Press PLAY MODE
repeatedly while the
USB device is stopped.
You can select normal
play ("FLDR" for all
files in the folder
on the USB device),
shuffle play ("SHUF" or
"FLDRSHUF" for folder
shuffle), or program
play ("PROGRAM").
When playing a VBR MP3/WMA file, the
1)
system may resume playback from a
different point.
"REP ONE": Repeats the current file.
2)
"REP FLDR": Repeats the current folder.
3)
"REP ALL": Repeats all files on a USB
4)
device.
Notes
• This system cannot play audio files on the
USB device in the following cases;
— when the total number of audio files on
a USB device exceeds 999.
— when the number of folders on a USB
device exceeds 256 (including the
"ROOT" folder and empty folders).
These numbers may vary depending on
the file and folder structure. Do not save
other types of files or unnecessary folders
on a USB device that has audio files.
• The system can play back to a depth of 8
folders only.
• Files and folders are displayed in the order
of their creation on the USB device.
• Folders that have no audio files are
skipped.
• Note that even when file name has the
correct file extension, if the actual file
differs, the system may produce noise or
may malfunction.
To erase audio files or folders from
the USB device
1
Press FUNCTION repeatedly until
"USB" appears on the display.
2
Connect the USB device to the
(USB) port.
3
Press / or
repeatedly to select the audio file
or folder you want to erase, then
start playback.
4
"
Press OPTIONS.
4)
5
Press / repeatedly to select
"ERASE," then press
6
Press / to select "FOLDER" or
"FILE," then press
"ERASE??" flashes on the display.
7
Press
When erasing is complete,
"COMPLETE" appears on the
display.
+/–
.
.
.