MSI Z97-GD65 Instruction Manual page 75

▶ Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled] Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.
▶ RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled] Enables this function.
[Disabled] Disables this function.
▶ RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore]
[DeskTop Save/Restore]
▶ LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled] Disables this feature.
▶ USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
▶ USB Controller [Enabled]
Enables or disables all USB controller.
▶ XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.
▶ EHCI Hand-off [Enabled]
Enables or disables EHCI hand-off support for the operating system without EHCI
hand-off feature.
▶ Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
▶ Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
▶ Serial (COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press <Enter> to enter the sub-
menu.
The BIOS POST splash screen will be saved/ restored.
The desktop image will be saved/ restored.
3-11 BIOS Setup