Cabinet Disassembly Instructions - Philips 19pfl4505d/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[3] Function
[2] Rear Cabinet
CBA
[5] Jack Holder
(D)
[6] Jack Holder
(A)
[11] IR Sensor
[7] Front Flare
CBA
[9] Jack CBA [8] Main CBA
[12] Panel Holder
[13] LCD Module
Assembly
[14] Front
Cabinet
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Stand
[1] D1 2(S-1)
Assembly
Rear
[2] D1 2(S-2), 6(S-3), 3(S-4)
Cabinet
2(S-5), *CN101,
Function D2
[3] Function Knob,
CBA D3
Knob Frame
D2
[4] Speaker *CN872, *CN2861
D3
Jack
[5] D2 (S-6)
Holder(D)
Jack
[6] D2 ---------------
Holder(A)
[4] Speaker
[10] Digital Main
CBA Unit
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
---
Step/
Loc. Part
Fig.
No.
No.
[7] Front Flare D2 Boss(S)
D2
[8] Main CBA
D3
D2
[9] Jack CBA
D3
Digital Main D2
[10]
CBA Unit D3
IR Sensor D2
[11]
CBA D3
Panel
[12] D2
Holder
LCD
[13] Module D2 ---------------
Assembly
Front
[14] D2 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-1
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
6(S-7), 2(S-8),
*CN102, *CN301,
*CN302, *CN601,
*CN702, *CN873,
AC Holder
3(S-9)
4(S-10), 4(S-11),
2(H-1), *CN3904,
Shield Box
Sensor LED Lens
2(S-12),
Separation Sheet
↓
(4) (5)
PL10.9DC
---
---
---
---
---
---
---
---
↓