Page 2
First attach 5 to the unit, then insert the unit into 1. Mounting the Unit in a Japanese Car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. With nippers or similar,...
• Be sure to connect the red power input lead to the positive 12 V power terminal which is energized when the ignition key is in the accessory position. • Run all ground wires to a common ground point. CDX-C510 • The use of optional instruments with this product will increase eye hazard. BUS CONTROL...
Connection Example BUS cable (not supplied) CD/MD changer RCA pin cord (RC-63 (1 m), RC-64 (2 m) or RC-65 (5 m)) (not supplied) LINE OUT RCA pin cord (not supplied) (EQ OUT) When connecting digital pre-amplifier LINE OUT REAR/LINE IN (EQ IN) Digital pre-amplifier REAR XDP-U50D...