Settings For The Display; Screen Setup - Sony DAV-DC150 Operating Instructions Manual

Settings for the Display

(SCREEN SETUP)

Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
To use the display, see "Using the Setup
Display" (page 69).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
MODE
(PROGRESSIVE)
x TV TYPE
Selects the aspect ratio of the connected TV (4:3
standard or wide).
4:3 LETTER Select this when you connect a 4:3
BOX
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
4:3 PAN SCAN
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
16:9 Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 LETTER BOX
4:3 PAN SCAN
16:9
4:3 LETTER BOX
ON
JACKET PICTURE
ON
:
OFF
(COMPONENT OUT)
: AUTO
Note
Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x SCREEN SAVER
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD or DATA CD (MP3
audio) for more than 15 minutes. The screen saver
will help prevent your display device from
becoming damaged (ghosting). Press H to turn
off the screen saver.
ON Turns on the screen saver.
OFF Turns off the screen saver.
x BACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a CD
or DATA CD (MP3 audio).
JACKET
The jacket picture (still picture)
PICTURE
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
GRAPHICS
A preset picture stored in the
system appears.
BLUE The background color is blue.
BLACK
The background color is black.
x BLACK LEVEL
Selects the black level (setup level) for the video
signals output from the jacks other than
COMPONENT VIDEO OUT.
ON Sets the black level of the output
signal to the standard level.
OFF
Lowers the standard black level.
Use this when the picture becomes
too white.
continued
71 US