Initial Operation; Packing Contents; Connecting The Mains Cable; Mount The Bracket - AgfaPhoto AF-5105MS User Manual

3 Initial Operation

Packing Contents

1 Photo Frame
1 Digital photo frame with bracket
2 Interchangeable Frames
2 Interchangeable Frames (standard version)
3 WOOD Version
3 real wood frame (only with WOOD version)
(wood frame, glass and passepartout (photo mount, paper)
fixed with screws)
4 Remote Control (with battery)
4 A remote control (with battery)
5 Power supply unit
5 Power supply
6 USB-cable
6 USB-cable
User Guide (not depicted)
User Guide (not depicted)
Verpackungsinhalt AF5135 wood
Packing Contents
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.

Mount the Bracket

Mount the Bracket
Assemble the Photo Frame bracket on the back to prop the
player up.
Ständer anbringen
Initial Operation

Connecting the Mains Cable

Mains Voltage at Setup Location
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
1 Insert the mains cable into the connection located on
the rear side of the device. Connect the mains cable to
the electrical socket. Do not switch on the device!

Connecting to a PC

Using the USB cable, you can connect your photo frame
to a computer to transfer files between the internal memo-
ry and computer.
If you connected the photo frame to a computer, the
inserted memory card can not be recognized.
1 Switch the device off using the on/off switch on the
rear.
2 With the photo frame turned off, connect the small end
of the cable to the frame and the large end to your com-
puter.
3 Switch the device on using the on/off switch on the
rear. Allow the computer a few moments to recognize
the new hardware. Compatible photo, music and
video files can be copied using Explorer
onto the internal memory
EN
6