NEC NP60 User Manual page 19

WARNING
* Installing your projector on the ceiling must be done
by a qualifi ed technician. Contact your NEC dealer
for more information.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If
the projector falls to the ground, you can be injured
and the projector severely damaged.
• Do not use the projector where temperatures vary
greatly. The projector must be used at temperatures
between 41˚F (5˚C) and 104˚F (40˚C). (Eco mode
selected automatically at 95°F to 104°F/35°C to 40°
C)
• Do not expose the projector to moisture, dust, or
smoke. This will harm the screen image.
• Ensure that you have adequate ventilation around
your projector so heat can dissipate. Do not cover
the vents on the side or the front of the projector.
2. Installation and Connections
Refl ecting the Image
Using a mirror to reflect your projector's image en-
ables you to enjoy a much larger image when a
smaller space is required. Contact your NEC dealer if
you need a mirror system. If you're using a mirror sys-
tem and your image is inverted, use the MENU and
SELECT buttons on your projector cabinet or your
remote control to correct the orientation. (→ page 42)
11