Control Locations And Functions - Commodore 1084s Manual

2
English
The chart below indicates the operating modes suitable to the type of computer you
are using :
Recommended Operating Mode
by
Computer Model
40-Column display
Separated
80-column display
Digital Analog
Composite LCA
RGBI RGB
Amiga
Commodore PC
Commodore 128
Commodore 64
x
x
X
X
X
2. Control Locations and Functions
X
Before you connect your monitor to your computer, you should familiarize yourself
with the location and function of the various control knobs, switches, and ports on
both the front and rear of the 1084S. Because the 1084S is a universal monitor and
can accommodate several types of computers, there are several ports and
connectors on the monitor's cabinet. However, if you are only using your monitor
with one type of computer, you will only need to use a few of the ports. (See diagram
on next page.)
Front View
1. VOLUME -- Adjusts the speaker's loudness.
2. GREEN -- Toggles between color display and monochrome green display (for
text processing).
3. TI NT -- Adjusts the red and green tints in the display.
4. COLOR -- Adjusts the color levels of the display.
5. CONTRAST -- Adjusts the display's contrast.
6. BRIGHTNESS -- Adjusts the brightness of the screen .
7. H. PHASE -- Adjusts the horizontal position of the screen.
NOTE: The Color Control is inactive when the 1084S is configured either for Analog
RGB or Digital RGBI display.