Table of Contents
Advertisement
1
I N T R O D U C T I O N
This section introduces you to your new MultiSync
MT1020G(XGA) or MT820G(SVGA) LCD Projector, pro-
vides a list of materials that comes with your projector and
describes the features and controls.
Congratulations On Your Purchase Of The
MultiSync MT1020G/820G LCD Projector
The MultiSync MT1020G/820G is one of the very best LCD
projectors available today. The multiple LCD panels enable
you to project precise images up to 300 inches across (mea-
sured diagonally) from your PC or Macintosh computer
(desktop or notebook), VCR, document camera, or even a
laser disc player.
You can use the projector on a tabletop or cart, you can
permanently mount it on a ceiling*
MultiSync MT1020G/820G LCD Projector to project im-
ages from behind the screen. The remote control can be used
wirelessly or with a cable, and you can even use the remote
control with the remote mouse receiver to operate the mouse
on your PC or Mac. But best of all, the MultiSync
MT1020G/820G is an NEC LCD projector. That means you
can depend on years of reliable performance and crystal-
clear presentations!
The features you'll enjoy include:
• Simple set up and operation.
• A high-performance 250 watt metal halide lamp that
delivers 700 ANSI lumens (MT1020G: 600 ANSI lu-
mens) and is guaranteed for 2000 hours of service or six
months, whichever comes first.
• A wireless remote control that operates the projector from
any angle.
• A laser pointer that' s built into the remote control.
• The power zoom control enables you to adjust the image
to be between 20 and 300 inches (measured diagonally).
• You can choose between video modes depending on your
source: "normal" for a typical picture, "natural" for true
color reproduction, and "camera" for use with a docu-
ment camera or low APL picture.
• The "image capture" enables you to use the entire picture
• An image can be projected from in front or behind a
• Supports most IBM VGA, S-VGA, XGA*
Note: Composite video standards are as follows:
1
, or you can use
NTSC:
PAL:
SECAM:
NTSC4.43: TV standard used in Middle East countries
• The remote control can be used with or without a cable,
• You can control your MultiSync MT1020G/820G LCD
• The contemporary cabinet design is compact, easy to
1
*
2
*
3
*
E – 5
as a background image or to create an image loop.
screen, and the projector can even be installed on the
ceiling.
3
(pseudo)*
, Macintosh or any other RGB signals within a
horizontal frequency range of 15.625 to 85 kHz
(MT820G: 15.625 to 60 kHz) and a vertical frequency
range of 50 to 85 Hz. This includes NTSC, PAL, SECAM
and NTSC 4.43 standard video signals.
U.S. TV standard for video in U.S. and Canada.
TV standard used in western Europe
TV standard used in France and Eastern Europe
and you can even use the remote to operate your PC or
Macintosh mouse wirelessly from across the room with
the remote mouse receiver.
Projector with a PC.
carry, and complements any office, board room or audito-
rium.
Installing the MultiSync MT1020G/820G LCD Projector
on the ceiling must be done by authorized NEC techni-
cians.
Consult your NEC dealer for more information.
An XGA image (1024
800 600 on MT820G.
An SXGA pseudo image (1280 1024) is not supported
by MT820G.
2
, SXGA
768) is compressed into
Advertisement
Table of Contents
