NEC MT 1020 User Manual page 13

6 RGB Input 1 Connector (D-Sub 15 pin)
Connect your PC or other RGB equipment such as IBM or compat-
ible computers. Use the NEC MultiCable that's supplied to connect
to a PC.
RGB 1 Audio Input Mini Jack
This is where you connect RGB audio output from a computer or
another RGB source.
7 RGB Input 2 Connector (Mini D-Sub 15 pin)
Connect a Macintosh or compatible computer here using the NEC
MultiCable that's supplied.
RGB 2 Audio Input Mini Jack
This is where you connect a second RGB audio output from a
computer or another RGB source.
8 Audio Output Mini Jack
Connect additional external speakers here to listen to audio coming
from your computer, Video or S-Video input.
9 RGB Monitor Output Connector (Mini D-Sub 15 pin)
You can use this connector to loop your computer image to an
external monitor from either the RGB 1 or RGB 2 input source.
0 Built-in Security Slot (
This security slot supports the MicroSaver
®
MicroSaver is a registered trademark of Kensington Microware
Inc. The logo is trademarked and owned by Kensington
Microware Inc.
INTRODUCTION
)
®
Security System.
REMOTE CONTROL
INPUT
VIDEO INPUT AUDIO INPUT
L / MONO
S-VIDEO INPUT
L / MONO
RGB INPUT 1
6
RGB INPUT 2
7
PC DC12V/400mA
REMOTE CONTROL CONTROL OUTPUT
INPUT OUTPUT
VIDEO INPUT AUDIO INPUT
L / MONO R
S-VIDEO INPUT AUDIO OUTPUT
L / MONO R
RGB INPUT 1 AUDIO
RGB MONITOR OUTPUT
RGB INPUT 2 AUDIO
DC12V/400mA
PC
CONTROL OUTPUT
OUTPUT
R
AUDIO OUTPUT
R
AUDIO
RGB MONITOR OUTPUT
AUDIO
K
0
23
8
9
24