Service Information; Specifications; Troubleshooting - Black & Decker BC40 Instruction Manual

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
Problem
The LED indicator does not illuminate
when the charging cable is connected to
the battery.
The green LED light stays on even when
batteries are not full.
The red LED light turns on.

SPECIFICATIONS

Rated voltage
AR
B2C
B3
B2
BR
Input current
Maximum output current
Continuous output voltage
Constant current output voltage <14.8VDC
Floating charging voltageo
The lowest voltage for the
charger to start to working
Battery type
Ambient temperature
Weight
Dimension (L×W ×H)

TROUBLESHOOTING

Cause
Loose connection at the
connection terminals.
No AC power at outlet
Overheating shutdown
Short circuit shutdown
The battery voltage is
too low.
The battery clips are not
connected properly to
the battery terminals.
reverse polarity
ENGLISH • 29
220V AC/ 50Hz
220V AC/ 50-60Hz
120V AC/ 60Hz
220V AC/ 60Hz
127V AC/ 60Hz
5A
40±4A
14.8±0.3V DC
13.6±0.3VDC
2.5V
12V lead-acid battery
32ºF~104 (0ºC~40ºC)
7.9 lb. (3600 g)
13.8 × 9.37 × 5.9 in
(350.6 × 238 × 151 mm)
Solution
Check the connection.
Ensure power is present at outlet.
Clean dirty ventilation openings or remove
objects covering the unit. Place the unit in a
cooler location.
Disconnect the cables, and check the power
circuit is right.
Check the battery voltage with a multimeter.
Recycle the battery if the battery voltage is
too low.
Check the connection and re-attach the clips
to the terminals.
Check the polarity