Setting Lan Mode - NEC LT240K User Manual

USING ON-SCREEN MENU Menu Descriptions & Functions

Setting LAN Mode

This feature allows you to set various setting items when the projector is
used on your network.
Consult with your network administrator about these settings.
NOTE: A LAN card is required for LAN connection; NEC's optional wireless LAN
card is available. For more information on inserting or ejecting a LAN card, see
pages E-63 and 64.
CAUTION: Make sure that the LAN card is removed during Standby mode
(NOT Idle mode) or with the main power off.
Failure to do so may cause damage to the PC card.
CAUTION: Do not use CompactFlash type cards except for flash memory
cards. Using a CompactFlash card with the help of a PC card adapter
could cause damage to the CompactFlash card.
NOTE: LAN card is not available when a PC card is used for the Viewer function.
Viewer is not available when LAN card is used for LAN connection.
IP Address
An IP address can be automatically assigned to this projector by your
DHCP server. If your network does not automatically assign IP address,
ask your network administrator for an address, and then register it manu-
ally.
E-102