Getting Started; Default Settings - Asus DSL-N12HP User Manual

2

Getting started

2.1 Default settings

Your ASUS Wireless ADSL Modem Router comes with an intuitive
web graphical user interface (GUI) that allows you to easily
configure its various features through a web browser such as
Internet Explorer, Firefox, Safari, or Google Chrome.
NOTE: The features may vary with different firmware versions.
The factory default settings of this device are summarized below.
• LAN IP address: 192.168.1.1
• LAN subnet mask: 255.255.255.0
• Administrative access (username: admin , password: admin)
• Wi-Fi access: enabled
NOTE: During power on, the device initializes all settings to default
values. It will then read the configuration profile from the permanent
storage section of flash memory. The default attributes are overwritten
when identical attributes with different values are configured. The
configuration profile in permanent storage can be created via the Web
GUI or telnet user interface, or other management protocols. The factory
default configuration can be restored either by pushing the reset button
for more than five seconds until the power indicates LED blinking or by
clicking the Restore Default Configuration option in the Restore Settings
screen.
12