On Screen Menus; How To Operate - NEC LT10 User Manual

-
nglish
User Controls

On Screen Menus

The Projector has multilingual On Screen menus that are
multilingual allowing you to make image adjustments and
change a variety of settings. The projector will automatically
detect the source.

How to operate

1.
To open the OSM menu, press "Menu" on the Remote Control or
Control Panel.
2.
When OSM is displayed, use
While making a selection on a particular page, press "Enter /
key to enter sub menu.
3.
Use keys to select the desired item and adjust the
settings by
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
5.
Press "Menu" to confirm, and the screen will return to the main
menu.
6.
To exit, press "Menu"again. The OSM menu will close and the
projector will automatically save the new settings.
Main Menu
keys to select the main menu.
key.
Sub Menu Setting
"