5.3 Accessing Your Powerline Adapter
Plug the powerline adapter you want to add to your network into a power socket and, if needed,
1
switch the power socket on.
Figure 20 Plug Your Powerline Adapter into a Power Socket
1
Connect the powerline adapter to your computer.
2
Use a LAN or Ethernet cable (shown below) to connect the LAN or Ethernet port on your adapter to
3
the same kind of port on your computer.
Figure 21 Connect Your Powerline Adapter to a Computer
Open the ZyXEL PLA Series Configuration utility on your computer. See
4
for how to launch the utility.
You are now ready to extend your powerline network or set up a second network.
5
• See
Section 5.4 on page 39
• See
Section 5.5 on page 41
• See
Section 5.6 on page 43
5.4 Adding a Powerline Adapter
This section shows you how to add a new powerline adapter to expand your existing network.
The figure below shows the family computer with Internet access on a powerline network. Expand
the network by adding a new powerline adapter connected to a printer.
Chapter 5 Powerline Network Setup Tutorial
PLA
2
to add a new powerline adapter to your network.
to set up a second network with your new adapters.
to set up a second network with your existing adapters.
PLA Series User's Guide
3
39
Section 4.2 on page 29