X14037ZA-3.fm 41 ページ 2004年2月20日 金曜日 午前11時26分
Special Features
Handset Locator
You can locate the handset or page the handset user with beep tones from the base
unit.
1
Press [HANDSET LOCATOR].
• "
" flashes rapidly. The handset beeps for 1 minute and displays "Call
IN USE
from Base".
To stop paging, press [HANDSET LOCATOR] again or press any
2
buttons except [d] or [B] on the handset.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
[*]
Press
(TONE) before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the dialing
mode will return to pulse.
Muting Your Conversation
During a call, you can mute your phone so the other party cannot listen to you.
When muting your conversation, you can hear the other party.
Press Mute.
• "Mute" will flash.
• To release the mute, press Mute again.
• If you press [C] or [s] to switch between the receiver
and speaker, the mute will be released.
Base Unit
Handset
Handset
Talk
00-00-30
(VE)
Mute
K
0
L
4
41