Setting Up Windows Xp Tcp/Ip Printing - Atlantis Land NetServer Pro A02-PSU-W54 Quick Start Manual

7. PS Wizard will help you to complete the port connection
automatically. You can start your printing task without any complex
configuration.

1.6.4 Setting Up Windows XP TCP/IP Printing

Following is the correct procedure for setting up TCP/IP LPR printing
under Windows XP.
Click Start > Printer and Faxes. Double Click Add a Printer then click
Next. In the next windows select Local Printer. Create a new Standard
TCP/IP Port then click Next. Input the IP Address of NetServer Pro, and
the Port name of the Port that will be printed to, then click Next.
In the next page Select Custom, and click Settings. Select LPR, and put
the Port name in the field labeled Queue Name. Then Click OK. Click
Next. Click Finish.
The Printer Install Wizard will now prompt for drivers. Select the correct
Make and Model, or click Have Disk, to provide the Manufacturer's Driver
Disk.
If you use Windows 98, the system will restart after
configuration.
ENGLISH
28