TH-58PF11EK
8.12. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 8 screws and then remove the Fan Blocks (1, 2).
3. Remove 4 screws and then remove the Fan (A).
4. Remove 20 screws and then remove the Fans (B, C, D,
E, F).
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
8.13. Removal of SU-Board and SD-
Board
1. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
22