5. DISASSEMBLY AND REASSEMBLY
5-21) AUGER MOTOR CASE
Part name
This shelf is designed to support the ice
maker & ice dispensed and Xtra Space
1. Remove the Xtra SpaceTM cover to push it
down and pull front.
2. Slide the partition out.
3. Remove the screws (2) on the bottom front of
Auger Motor
the case.
Case
4. Slide out the case while disconnecting the wire
connect.
5-22) FREEZER LIGHT
Part name
The freezer light is located in the bottom of
the auger motor case. The light is covered by
an opaque cover.
Freezer Light
1. Remove the screw and the light cover.
5-23) EVAPORATOR COVER IN FREEZER
Part name
1. Pull out the screw caps and remove screws
(6).
Evaporator
2. Remove the evaporator cover in the
Cover In
direction of the arrow as shown
Freezer
5-24) UPPER DUCT
Part name
1. Remove the screw cap and screw.
2. Slide the upper fan ductwork out while
disconnecting the wire connector.
(Lamp and Thermistor)
Auger Motor
Case
How To Do
How To Do
How To Do
Descriptive Picture
44
Descriptive Picture
TM
.
Screws
Descriptive Picture
Descriptive Picture
Descriptive Picture
Partition