Access List - D-Link DCS-7517 User Manual

Configuration
This section explains how to control access permissions by verifying the connecting
client PC's IP address.
General Settings
Maximum number of concurrent streaming connection(s) limited to: Allows
simultaneous live viewing for 1~10 clients (including stream 1 ~ stream 3). The
default value is 10. If you modify the value and click Save, all current connections
will be disconnected and will automatically attempt to reconnect.
View Information: Click this button to display a connection status window that
shows a list of the current connections.
• IP address: Current connections to the camera.
• Elapsed time: How much time the client has been on the webpage.
• User ID: If the administrator has set a password for the webpage, clients must
enter a user name and password to access the live video. The user name will be
displayed in the User ID column. If the administrator allows clients to link to the
webpage without a user name and password, the User ID column will be empty.
There are some situations which allow clients access to the live video without a user
name and password:
1. The administrator did not set up a user password. For more information about
how to set up a user password and manage user accounts, please refer to User
Settings.
2. The administrator has set up a user password, but set RTSP Authentication to
"disable". For more information about RTSP Authentication, please refer to RTSP
Streaming.
• Refresh: Click this button to refresh all current connections.
• Add to deny list: You can select entries from the Connection Status list and add
them to the Deny List to deny access. Please note that the selected connections
will only be disconnected temporarily and will automatically try to reconnect. If
you want to enable the denied list, please select Enable access list filtering and
click Save in the first column.
D-Link DCS-7517 User Manual

Access List

48