Flexible Arm Installation - NEC MultiSync LCD1770VX User Manual

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor
to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to
remove the stand.
2. Using the 4 screws from the stand removal attach the arm to the monitor
(Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To
meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
Figure F.1
100mm
4 Screws (4M)
(Max Depth: 8.5mm)
LCD1770VX042205.pmd
100mm
Weight of LCD assembly: 4.3kg (MAX)
8
8
Caution: Please use the attached
screw (4pcs) when mounting.
(M4 x 12mm with washer type.)
Thickness of Bracket (Arm)
2.0~3.2mm
4/26/05, 9:49 AM