NEC PlasmaSync 42XC10 User Manual page 18

Main Menu Sub Menu
PICTURE PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
WHITE BALANCE.
FILM MODE
PICTURE MODE
GAMMA
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled.
SET UP LEVEL
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled.
COLOR CONTROL
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled.
Sub Menu2 Explanation
Store picture menu settings and input terminal information. The
memory number is 1-6.
The "PICTURE MEMORY" screen appears when the SET button is
pressed on the "PICTURE MEMORY" MENU.
Adjusts the image brightness in relationship to the white level.
Press + or - to adjust.
Adjusts the image brightness in relationship to the background.
Press + or - to adjust.
Adjusts the crispness of the image. Press + or - to adjust.
Adjusts the color depth of the screen. Press + or - to adjust.
Adjusts the tint of the screen. Press + or - to adjust.
Adjusts the amount of noise reduction. Press + or - to adjust.
Adjusts the color temperature of the entire screen. A low
color temperature will make the screen reddish. A high color
temperature will make the screen bluish.
GAIN RED The "WHITE BALANCE" appears when the SET button is pressed
on the "COLOR TEMP." OSD menu.
GAIN GREEN
GAIN RED/GREEN/BLUE: Adjusts the white level of the white
balance.
GAIN BLUE
RESET Resets the factory default settings. Select "ON", then press the
SET button to reset.
Selects Film mode.
Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],
[CINEMA2], [DEFAULT].
STANDARD: For watching in a bright room.
CINEMA1, 2: For watching in a dark room, especially good for
movies.
BRIGHT: Brighter picture than STANDARD.
DEFAULT: Restores factory default settings.
Select a display gamma for best picture quality.
2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number
increases.
S: Special gamma for certain types of movies. Raises the dark
parts and lowers the light parts of the image. (S-Curve)
These values are approximate.
Adjusts the video black level.
VIDEO signal input only.
RED Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and
Cyan.
GREEN
VIDEO and DVD/HD 1/2 input only.
BLUE
YELLOW
MAGENTA
CYAN
RESET Resets the factory default settings. Select "ON", then press the
SET button to reset.
English-15
On-Screen Display (OSD)
Default Reset
OFF YES
50 YES
50 YES
50 YES
50 YES
50 YES
OFF YES
MIDDLE YES
50 YES
50 YES
50 YES
OFF YES
ON YES
STANDARD YES
2.2 YES
0% YES
50 YES
50 YES
50 YES
50 YES
50 YES
50 YES
OFF YES