802.11a/b/g intelligent sequential outdoor wireless access point (60 pages)
Summary of Contents for Vivotek 500AG
Page 1
1. Product and Parts 1. Product and Parts 1. Product and Parts 1. 500AG/600AG/3300AG 802.11a/b/g Outdoor Wireless Access Point unit 2. PoE Power Injector (Input AC 90~240V, Output DC 48V/1A) 3. AC Power Cord 4. 30m MIL-C-5015 IP67 Cat-5 Ethernet Cable 5.
Page 2
Outdoor Access Point Install Diagram 2.4GHz or 5.8GHz Antenna 1.5M CFD-400 RF Cable N-Type Male to Male Antenna Connector Cable 2M IP67 RS-232 500AG Wireless Serial Connector Cable Access Point (For Setting AP) 30M IP67 Cat-5 Waterproof Ethernet Connector Cable (Power)
Page 3
3. 3. 3. 3. AP Configuration with SMT User Interface AP Configuration with SMT User Interface AP Configuration with SMT User Interface AP Configuration with SMT User Interface 3 3 3 3 - - - - 1. 1. 1. 1. Conf Configuring AP iguring AP with with Telnet...
Page 4
3 3 3 3 - - - - 2. 2. 2. 2. Configuring AP Configuring AP Configuring AP with Configuring AP with with with C C C C onsole onsole onsole onsole Alternatively, the AP can be configured via console and serial port on your PC. 1.Connect power supply to PoE injector with the AC power cord provided, and connect The AP to POWER &...
Page 5
5. Waterproof Installation and Protect Device 5. Waterproof Installation and Protect Device 5. Waterproof Installation and Protect Device 5. Waterproof Installation and Protect Device Most of the problems of outdoor models are from the connector connections that loosen over time due to vibration or other forces, even allowing moisture to penetrate the connector and seriously affecting the data and radio signal transmit.