Removing The Lid And A Hinge - Maytag MTW6500TB Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. To remove the lid:
a) Raise the lid and remove the two hinge
pin screws from both sides.
b) Lift the lid, slide it off the hinge pins,
and remove the lid from the washer.

REMOVING THE LID AND A HINGE

Lid Hinge
Pin Screws
Washer Lid
Hinge Pin
3. To remove a hinge:
a) Remove the lid (see step 2).
b) Pull the hinge pin out of the hinge you
are removing.
c) Remove the top hex-head screw from
the hinge you are removing.
Top Hinge Screw
d) Raise the cabinet top (see page 4-4 for
the procedure).
e) Remove the hex-head screw from the
hinge mounting bracket, and remove
the hinge from the cabinet top.
Lid Hinge
Hinge Bracket
Screw
4-9
Pull Hinge Pin Out