Sony DSX-A42UI Operating Instructions Manual page 20

OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change
the source by pressing OFF.
 Indicates that the USB device is out of
order, or an unsupported device is
connected.
READ
 The unit is reading all track and album
information on the USB device.
 Wait until reading is complete and
playback starts automatically. Depending
on the USB device structure, it may take
more than a minute.
STOP
 When repeat play is not set, playback of the
last track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
20
GB