Table of Contents
Advertisement
Initializing the GPS receiver
Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first
time.
Each time you turn on the device, GPS reception starts within one minute.
If the navigation device has been switched off for more than a week, the next initializa-
tion can take up to 10 minutes.
As soon as the navigation device has been switched on, initialization of the GPS
receiver begins.
In the upper right-hand corner of the display, the
data from at least 3 satellites is received, the symbol changes to
Note: If the GPS symbol displays GPS Ready after considerably less than 20 minutes,
it is advisable to leave the receiver switched on for at least an additional 15 minutes to
ensure reliable operation.
Setting the volume
The volume of the spoken driving instructions can be adjusted during navigation.
With a map displayed:
1. Tap
The volume bar opens. It contains three buttons for adjusting the volume:
(
Louder
2. Tap
The volume bar closes.
Stopping the SmartMirror
• Press and hold the
2009
Revision 1.0
(
Volume
.
)
,
(
Quieter
,
)
)
(
again.
Volume
)
(On/Off) switch for at least 2 seconds.
ESCORT SmartMirror User's Guide
ESCORT INC / NAVIGON INC
symbol appears. As soon as
GPS
(
Volume on/off
.
)
Basic Operations
Starting the SmartMirror
.
GPS Ready
11
Advertisement
Table of Contents
