Table of Contents
Advertisement
Troubleshooting
4. Adjust the Lens focus.
■ The Illumination Adjustment
1. Remove the 14 point screws and the Bottom cover.
:TH,B,M4.L15,BLK,SWRCH18A
3. Rotate the 2 points fine adjustment dials.
4-28
justmanuals.com
2. Turn off the power to put the unit into the STAND-BY mode.
Press "Mute" → "1" → "8" →"2" →"POWER" buttons on
the Remote Control. Select "DDP3021" and enter the Test
Pattern (DDP) Menu Press the ▲ ▼ (Up or Down) buttons,
then press ENTER to select. Press the ▶ (Right) button until
you see the Full White picture.
4. Upper knob is for the vertical illumination adjustment and the
lower knob is for the horizontal illumination adjustment.
Focus Alignment
Samsung Electronics
Hide quick links:
Advertisement
Table of Contents
