National Instruments NI 7831R User Manual page 70

R
RAM
resolution
RIO
rms
RSE
RTSI
S
s
S
S/s
signal conditioning
slew rate
© National Instruments Corporation
Random-access memory—The generic term for the read/write memory that
is used in computers. RAM allows bits and bytes to be written to it as well
as read from. Various types of RAM are DRAM, EDO RAM, SRAM, and
VRAM.
The smallest signal increment that can be detected by a measurement
system. Resolution can be expressed in bits, in proportions, or in percent of
full scale. For example, a system has 12-bit resolution, one part in 4,096
resolution, and 0.0244% of full scale.
Reconfigurable I/O.
Root mean square.
Referenced single-ended mode—All measurements are made with respect
to a common reference measurement system or a ground. Also called a
grounded measurement system.
Real-time system integration bus—The timing and triggering bus that
connects multiple devices directly. This allows for hardware
synchronization across devices.
Seconds.
Samples.
Samples per second—Used to express the rate at which a DAQ board
samples an analog signal.
The manipulation of signals to prepare them for digitizing.
The voltage rate of change as a function of time. The maximum slew rate
of an amplifier is often a key specification to its performance. Slew rate
limitations are first seen as distortion at higher signal frequencies.
G-7
Glossary
NI 7831R User Manual