Getting Started - Sony KV-EF29N6A Service Manual

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
Using Your New TV

Getting Started

Step 1
Connect the antenna
If you wish to connect a VCR, see the "Connecting a VCR" diagram below.
Antenna
connector
(not supplied)
or
Antenna cable
(not supplied)
Connecting a VCR
Antenna cable
(not supplied)
To antenna
output
VCR
AUDIO VIDEO
VIDEO IN
VIDEO OUT
To S video
To video and output
audio outputs
Audio/Video cable
(not supplied)
4
Using Your New TV
SECTION 1
GENERAL
Antenna
cable
(supplied)
: Signal flow
Antenna cable
(supplied)
To ˘
(antenna)
VIDEO IN MON/TV
OUT
S video cable
VIDEO
(not supplied)
S1 VIDEO
L (MONO)
AUDIO
R
To S1 VIDEO
To VIDEO IN 1,
2, or 3
VIDEO (yellow)
AUDIO-L (MONO)(white)
AUDIO-R (red)
: Signal flow
Notes
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program position 0 on the TV.
• Do not simultaneously connect video equipment to the VIDEO 3 INPUT
jacks at the front and the VIDEO IN 3 jacks at the rear of your TV.
• If both S1 VIDEO and VIDEO of VIDEO IN 1 are input simultaneously, the
S1 VIDEO is automatically selected. To view the video input to VIDEO IN
1, disconnect the S video cable.
• When no signal is input to the connected VCR (or video equipment), the
screen becomes blue.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels
Notes
• When you use the TV for the first time, preset the channels by
pressing AUTO PROGR button inside the front cover.
• If you use a cable TV system, select "CABLE : ON" of the
PRESET menu before presetting the channels. (See "Changing
other PRESET menu options" on page 30.)
VIDEO 3 INPUT
VIDEO
AUDIO
S1 VIDEO (MONO)
2
AUTO
PROGR
AUTO PROGRAM
Now You Are Ready. . .
The channels are now automatically preset in your TV. To preset the channels
manually, see "Adding or erasing channels" on page 28.
1
MAIN POWER
MAIN POWER
ONE-PUSH AUTOMATIC PROGRAMING
1 1
5
Using Your New TV