Entering Sleep Mode; Exiting Sleep Mode; About The Motorcycle Mount; Adjusting The Volume - BMW Motorrad Navigator V Quick Start Manual

2 Tilt your device back until it snaps into place and the top of
the latch is flat.
NOTE: Remove the device from the motorcycle mount before
connecting a battery charger to your motorcycle.
Removing Your Device from the Motorcycle Mount
1 Press the release button
2
Lift out the device.

Entering Sleep Mode

Press the Power key.

Exiting Sleep Mode

While the device is in sleep mode, press the Power key.

About the Motorcycle Mount

You can access specific device features using the buttons on
the motorcycle mount.
Select to zoom in and out on the map.
Select to use functionality marked with a
Select to view the map, compass, trip computer, and media player.
Hold to open the brightness settings.
Select to hear the current prompt when you have a Bluetooth ®
helmet or headset connected.
Hold to open the volume settings.

Adjusting the Volume

1
Select Volume.
2
Select an option:
• Select or to adjust the volume.
• Select to mute the device.
• Select for additional options.

Finding Locations

Finding BMW Dealers

You can find a BMW dealer closest to your location.
Select Where To? > BMW Motorrad.
6
on the side of the mount.
or .
Finding Locations
Contact Information
If you encounter any difficulty while using your BMW Navigator
V, or if you have any questions, contact your BMW Motorrad
dealer.

Finding a Location by Category

1
Select Where To?.
2
Select a category, or select Categories.
3 If necessary, select a subcategory.
4
Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
three destinations you selected.
1
Select Where To?.
2
Select a category, or select Categories.
3
Select a category.
4 If applicable, select a destination from the Quick Search list.
5
If necessary, select the appropriate destination.

Finding a Location Using the Search Bar

You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
1
Select Where To?.
2
Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the street
number and street name.
• To search for an address in another city, enter the street
number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude
coordinates.
5
Select an option:
• To search using a suggested search term, select the
term.
• To search using the text you entered, select
6
If necessary, select a location.

Saving a Home Location

You can set your home location for the location you return to
most often.
1 Select Where To? >
2
Select Enter My Address, Use Current Location, or
Recently Found.
The location is saved as "Home" in the Saved menu.
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
1
Select Where To? > Saved > Home.
2
Select .
3
Select > Edit.
4 Enter your changes.
5
Select Done.
.
> Set Home Location.
EN-US